Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Concrete look in your bathroom or shower room? With the LAB Bathroom Coating system you can finish concrete ciré or cement-based plaster mortars waterproof. This LAB Bathroom Coating system is, as the name suggests, transparent and consists of two different products, namely: LAB Bathroom Coating Primer Transparent and this LAB Bathroom Coating Transparent.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Transparent

Use LAB Bathroom Coating Transparent only on bathroom walls and floors made of concrete ciré or cement-based plaster mortars that have been treated with LAB Bathroom Coating Primer Transparent . We do not recommend LAB Bathroom Coating Transparent on the floor of the wet cell.

Consumption: 10 to 12 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the height and length of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 11 m² = 0.9 litres) you need 0.9 litres of LAB Bathroom Coating Transparent for 1 layer (calculated with a consumption of 11 m² per litre). We always recommend applying two layers.

Photo 1 and 2: Bathroom coating Transparent over cement-based plaster mortar @jellinadetmar.

Photo 3 and 4: Bathroom coating Transparent over cement-based plaster mortar.